2025 LATEST 350-601 VERSION | EFFICIENT 100% FREE IMPLEMENTING CISCO DATA CENTER CORE TECHNOLOGIES (350-601 DCCOR) DUMPS FREE

2025 Latest 350-601 Version | Efficient 100% Free Implementing Cisco Data Center Core Technologies (350-601 DCCOR) Dumps Free

2025 Latest 350-601 Version | Efficient 100% Free Implementing Cisco Data Center Core Technologies (350-601 DCCOR) Dumps Free

Blog Article

Tags: Latest 350-601 Version, 350-601 Dumps Free, 350-601 Exams Dumps, Valid 350-601 Test Prep, Reliable 350-601 Test Duration

2025 Latest DumpsFree 350-601 PDF Dumps and 350-601 Exam Engine Free Share: https://drive.google.com/open?id=15nRS6Kx6TViG1SKkXPOOlMIyqUoenNK4

We would like to make it clear that learning knowledge and striving for certificates of 350-601 exam is a self-improvement process, and you will realize yourself rather than offering benefits for anyone. So our 350-601 training guide is once a lifetime opportunity you cannot miss. With all advantageous features introduced on the website, you can get the first expression that our 350-601 Practice Questions are the best.

Test Content Outline

The Cisco 350-601 Exam covers 5 key knowledge areas that are usually addressed by the CCNP Data Center certificate. These include the following:

  • Network (25%);
  • Automation (15%);
  • Storage Network (20%);
  • Compute (25%);
  • Security (15%).

>> Latest 350-601 Version <<

350-601 Dumps Free & 350-601 Exams Dumps

We own the profession experts on compiling the 350-601 exam questions and customer service on giving guide on questions from our clients. Our 350-601 preparation materials contain three versions: the PDF, the Software and the APP online. They give you different experience on trying out according to your interests and hobbies. And our 350-601 Study Guide can assure your success by precise and important information.

Cisco Implementing Cisco Data Center Core Technologies (350-601 DCCOR) Sample Questions (Q53-Q58):

NEW QUESTION # 53
A Cisco MDS 9000 Series Switch is configured for SAN Analytics and SAN Telemetry Streaming. An engineer must enable analytics for NVMe on interfaces in the range of fc1/1-12. Due to a large amount of traffic generated in the SAN environment, the data must be collected at regular intervals of 60 seconds from ports fc 1-12 and then for ports fc13-24 for the next 60 seconds. Ports in the range fc4/13-14 were already enabled for analytics. Which set of commands must be used to meet these requirements?

  • A. Option C
  • B. Option D
  • C. Option B
  • D. Option A

Answer: D

Explanation:
The commands under option A enable analytics for NVMe on interfaces in the range of fc1/1-12 with port-sampling module 4 size 12 interval 60 analytics nvme. This meets the requirement of collecting data at regular intervals of 60 seconds from ports fc1/1-12. References:
* Cisco MDS 9000 Series NX-OS Interfaces Configuration Guide, Release 8.x - Configuring SAN
* Analytics and Telemetry Streaming [Cisco MDS 9000 NX-OS and SAN-OS Software], Configuring SAN Analytics and Telemetry Streaming, Configuring SAN Analytics
* Cisco MDS 9000 Series NX-OS Interfaces Configuration Guide, Release 8.x - Configuring SAN Analytics and Telemetry Streaming [Cisco MDS 9000 NX-OS and SAN-OS Software], Configuring SAN Analytics and Telemetry Streaming, Configuring Port Sampling


NEW QUESTION # 54
Which two configuration settings are available in the in the cisco UCS flmware Auto sync server policy?

  • A. User Notification
  • B. User Acknowledge
  • C. No Action
  • D. Delayed Action
  • E. Immediate Action

Answer: B,C

Explanation:
Following are the values for the Firmware Auto Sync Server policy:
* User Acknowledge-Firmware on the server is not synchronized until the administrator acknowledges the upgrade in the Pending Activities dialog box.
* No Action-No firmware upgrade is initiated on the server.
Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/firmware-mgmt/gui/2-
2/b_GUI_Firmware_Management_22/b_GUI_Firmware_Management_22_chapter_01111.pdf


NEW QUESTION # 55
An engineer is performing a configuration on a Cisco Nexus 5000 Series Switch. The requirement is for the current Fibre Channel IDs in VSAN 120 to be saved across reboots. The Cisco environment also must integrate with a third-party solution that requires persistent Fibre Channel IDs for the VSAN The WWN of the Cisco switch must be 33:*8:00:05:30:00:16:df and its Fibre Channel ID 0x070128 Which command set meets these requirements?

  • A. Option C
  • B. Option A
  • C. Option D
  • D. Option B

Answer: A

Explanation:
The correct command set is Option C, which includes the command fcdomain fcid persistent vsan 120. This command ensures that the Fibre Channel IDs (fcid) are saved across reboots for VSAN 120, meeting the requirement for persistent Fibre Channel IDs. The other commands in Option C are used to set the WWN and fcid as per the given requirements.
References: For a comprehensive explanation, please refer to the "Implementing and Operating Cisco Data Center Core Technologies (DCCOR)" course, which covers the skills and technologies needed to implement data center compute, LAN, and SAN infrastructure, including the management of Fibre Channel IDs


NEW QUESTION # 56
A customer reports Fibre Channel login requests to a cisco MDS 9000 series Switch from an unauthorized source. The customer requires a feature that will allow all devices already logged in and learned in and learned to be added to the Fibre channel active database. Which two features must be enabled to accomplish this goal? (Choose two.)

  • A. Enhanced zoning
  • B. Auto-learning
  • C. Port security
  • D. Smart aliases
  • E. Device aliases

Answer: B,C

Explanation:
https://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_3_x/configuration/guides/fm_3_3_1/psec.html Port Security Activation By default, the port security feature is not activated in any switch in the Cisco MDS 9000 Family. By activating the port security feature, the following apply: Auto-learning is also automatically enabled, which means: From this point, auto-learning happens for the devices or interfaces that were already logged into the switch and also for the new devices will login in future. You cannot activate the database until you disable auto-learning. All the devices that are already logged in are learned and are added to the active database. All entries in the configured database are copied to the active database. After the database is activated, subsequent device login is subject to the activated port bound WWN pairs, excluding the auto-learned entries. You must disable auto-learning before the auto-learned entries become activated.


NEW QUESTION # 57
Refer to the exhibit.

Which command is run from the Guest Shell to set the description on the first five interfaces of the Cisco Nexus switch?

  • A. Option C
  • B. Option A
  • C. Option D
  • D. Option B

Answer: C


NEW QUESTION # 58
......

If you have interests with our 350-601 practice materials, we prefer to tell that we have contacted with many former buyers of our 350-601 exam questions and they all talked about the importance of effective 350-601 learning prep playing a crucial role in your preparation process. Our practice materials keep exam candidates motivated and efficient with useful content based wholly on the real 350-601 Guide materials.

350-601 Dumps Free: https://www.dumpsfree.com/350-601-valid-exam.html

What's more, part of that DumpsFree 350-601 dumps now are free: https://drive.google.com/open?id=15nRS6Kx6TViG1SKkXPOOlMIyqUoenNK4

Report this page